Agilent Technologies InfiniiVision 3000 X-Series

990 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
32 :WAVeform Commands
:WAVeform:XORigin
(see page 1138)
Query Syntax
:WAVeform:XORigin?
The :WAVeform:XORigin? query returns the x- origin value for the currently
specified source. XORigin is the X-axis value of the data point specified by
the :WAVeform:XREFerence value. In this product, that is always the
X-axis value of the first data point (XREFerence = 0).
Return Format
<value><NL>
<value> ::= x-origin value in the current preamble in 64-bit
floating point NR3 format
See Also • "Introduction to :WAVeform Commands" on page 961
• ":WAVeform:PREamble" on page 976
• ":WAVeform:XREFerence" on page 991
Example Code • "Example Code" on page 977