Agilent Technologies InfiniiVision 3000 X-Series

:WMEMory<r> Commands 34
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 1035
:WMEMory<r>:CLEar
(see page 1138)
Command Syntax
:WMEMory<r>:CLEar
<r> ::= 1-2 in NR1 format
The :WMEMory<r>:CLEar command clears the specified reference waveform
location.
See Also • Chapter 34, “:WMEMory<r> Commands,” starting on page 1033
• ":WMEMory<r>:SAVE" on page 1038
• ":WMEMory<r>:DISPlay" on page 1036