238 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
7 :ACQuire Commands
:ACQuire:SRATe
(see page 1138)
Query Syntax
:ACQuire:SRATe?
The :ACQuire:SRATe? query returns the current oscilloscope acquisition
sample rate. The sample rate is not directly controllable.
Return Format
<sample_rate><NL>
<sample_rate> ::= sample rate in NR3 format
See Also • "Introduction to :ACQuire Commands" on page 227
• ":ACQuire:POINts" on page 232
To Next Page
Loading...
