Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

:SEARch Commands 28
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 841
:SEARch:SERial:M1553:PATTern:DATA
(see page 1138)
Command Syntax
:SEARch:SERial:M1553:PATTern:DATA <string>
<string> ::= "nn...n" where n ::= {0 | 1}
The :SEARch:SERial:M1553:PATTern:DATA command specifies the
additional 11 bits when searching for the MIL-STD-1553 Remote Terminal
Address + 11 Bits.
Query Syntax
:SEARch:SERial:M1553:PATTern:DATA?
The :SEARch:SERial:M1553:PATTern:DATA? query returns the current value
setting for the additional 11 bits.
Return Format
<string><NL>
<string> ::= "nn...n" where n ::= {0 | 1}
See Also • Chapter 28, “:SEARch Commands,” starting on page 777
• ":SEARch:SERial:M1553:MODE" on page 840

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English