:MTESt Commands 22
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 503
:MTESt:COUNt:WAVeforms
(see page 1138)
Query Syntax
:MTESt:COUNt:WAVeforms?
The :MTESt:COUNt:WAVeforms? query returns the total number of
waveforms acquired in the current mask test run.
Return Format
<count><NL>
<count> ::= number of waveforms in NR1 format.
See Also • "Introduction to :MTESt Commands" on page 491
• ":MTESt:COUNt:FWAVeforms" on page 500
• ":MTESt:COUNt:TIME" on page 502
• ":MTESt:COUNt:RESet" on page 501
Example Code • "Example Code" on page 491
To Next Page
Loading...
