Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

:DVM Commands 14
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 315
:DVM:SOURce
(see page 1138)
Command Syntax
:DVM:SOURce <source>
<source> ::= {CHANnel<n>}
<n> ::= 1-2 or 1-4 in NR1 format
The :DVM:SOURce command sets the select the analog channel on which
digital voltmeter (DVM) measurements are made.
The selected channel does not have to be on (displaying a waveform) in
order for DVM measurements to be made.
Query Syntax
:DVM:SOURce?
The :DVM:SOURce? query returns the selected DVM input source.
Return Format
<source><NL>
<source> ::= {CHAN<n>}
<n> ::= 1-2 or 1-4 in NR1 format
See Also • ":DVM:ENABle" on page 312
• ":DVM:MODE" on page 314
• ":DVM:ARANge" on page 310
• ":DVM:CURRent" on page 311
• ":DVM:FREQuency" on page 313

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English