Agilent Technologies InfiniiVision 3000 X-Series

:SEARch Commands 28
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 793
:SEARch:RUNT:POLarity
(see page 1138)
Command Syntax
:SEARch:RUNT:POLarity <slope>
<polarity> ::= {POSitive | NEGative | EITHer}
The :SEARch:RUNT:POLarity command sets the polarity for the runt
search.
Query Syntax
:SEARch:RUNT:POLarity?
The :SEARch:RUNT:POLarity? query returns the currently set runt polarity.
Return Format
<slope><NL>
<polarity> ::= {POS | NEG | EITH}
See Also • Chapter 28, “:SEARch Commands,” starting on page 777
• ":SEARch:MODE" on page 780
• ":SEARch:RUNT:SOURce" on page 795