Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

:SBUS<n> Commands 27
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 669
:SBUS<n>:FLEXray Commands
NOTE
These commands are only valid when the FLEXray triggering and serial decode option
(Option FLEX) has been licensed.
Table 102 :SBUS<n>:FLEXray Commands Summary
Command Query Options and Query Returns
:SBUS<n>:FLEXray:AUTo
setup (see page 671)
n/a n/a
:SBUS<n>:FLEXray:BAUD
rate <baudrate> (see
page 672)
:SBUS<n>:FLEXray:BAUD
rate? (see page 672)
<baudrate> ::= {2500000 | 5000000
| 10000000}
:SBUS<n>:FLEXray:CHAN
nel <channel> (see
page 673)
:SBUS<n>:FLEXray:CHAN
nel? (see page 673)
<channel> ::= {A | B}
n/a :SBUS<n>:FLEXray:COUN
t:NULL? (see
page 674)
<frame_count> ::= integer in NR1
format
:SBUS<n>:FLEXray:COUN
t:RESet (see
page 675)
n/a n/a
n/a :SBUS<n>:FLEXray:COUN
t:SYNC? (see
page 676)
<frame_count> ::= integer in NR1
format
n/a :SBUS<n>:FLEXray:COUN
t:TOTal? (see
page 677)
<frame_count> ::= integer in NR1
format
:SBUS<n>:FLEXray:SOUR
ce <source> (see
page 678)
:SBUS<n>:FLEXray:SOUR
ce? (see page 678)
<source> ::= {CHANnel<n>}
<n> ::= 1-2 or 1-4 in NR1 format
:SBUS<n>:FLEXray:TRIG
ger <condition> (see
page 679)
:SBUS<n>:FLEXray:TRIG
ger? (see page 679)
<condition> ::= {FRAMe | ERRor |
EVENt}
:SBUS<n>:FLEXray:TRIG
ger:ERRor:TYPE
<error_type> (see
page 680)
:SBUS<n>:FLEXray:TRIG
ger:ERRor:TYPE? (see
page 680)
<error_type> ::= {ALL | HCRC |
FCRC}
:SBUS<n>:FLEXray:TRIG
ger:EVENt:AUToset
(see page 681)
n/a n/a

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English