Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

670 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
27 :SBUS<n> Commands
:SBUS<n>:FLEXray:TRIG
ger:EVENt:BSS:ID
<frame_id> (see
page 682)
:SBUS<n>:FLEXray:TRIG
ger:EVENt:BSS:ID?
(see page 682)
<frame_id> ::= {ALL | <frame #>}
<frame #> ::= integer from 1-2047
:SBUS<n>:FLEXray:TRIG
ger:EVENt:TYPE
<event> (see
page 683)
:SBUS<n>:FLEXray:TRIG
ger:EVENt:TYPE? (see
page 683)
<event> ::= {WAKeup | TSS | {FES
| DTS} | BSS}
:SBUS<n>:FLEXray:TRIG
ger:FRAMe:CCBase
<cycle_count_base>
(see page 684)
:SBUS<n>:FLEXray:TRIG
ger:FRAMe:CCBase?
(see page 684)
<cycle_count_base> ::= integer
from 0-63
:SBUS<n>:FLEXray:TRIG
ger:FRAMe:CCRepetitio
n
<cycle_count_repetiti
on> (see page 685)
:SBUS<n>:FLEXray:TRIG
ger:FRAMe:CCRepetitio
n? (see page 685)
<cycle_count_repetition> ::=
{ALL | <rep #>}
<rep #> ::= integer values 2, 4,
8, 16, 32, or 64
:SBUS<n>:FLEXray:TRIG
ger:FRAMe:ID
<frame_id> (see
page 686)
:SBUS<n>:FLEXray:TRIG
ger:FRAMe:ID? (see
page 686)
<frame_id> ::= {ALL | <frame #>}
<frame #> ::= integer from 1-2047
:SBUS<n>:FLEXray:TRIG
ger:FRAMe:TYPE
<frame_type> (see
page 687)
:SBUS<n>:FLEXray:TRIG
ger:FRAMe:TYPE? (see
page 687)
<frame_type> ::= {NORMal |
STARtup | NULL | SYNC | NSTArtup
| NNULl | NSYNc | ALL}
Table 102 :SBUS<n>:FLEXray Commands Summary (continued)
Command Query Options and Query Returns

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English