Agilent Technologies InfiniiVision 3000 X-Series

740 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
27 :SBUS<n> Commands
:SBUS<n>:SPI:BITorder
(see page 1138)
Command Syntax
:SBUS<n>:SPI:BITorder <order>
<order> ::= {LSBFirst | MSBFirst}
The :SBUS<n>:SPI:BITorder command selects the bit order, most significant
bit first (MSB) or least significant bit first (LSB), used when displaying
data in the serial decode waveform and in the Lister.
Query Syntax
:SBUS<n>:SPI:BITorder?
The :SBUS<n>:SPI:BITorder? query returns the current SPI decode bit
order.
Return Format
<order><NL>
<order> ::= {LSBF | MSBF}
Errors • "- 241, Hardware missing" on page 1099
See Also • "Introduction to :SBUS<n> Commands" on page 629
• ":SBUS<n>:MODE" on page 633
• ":SBUS<n>:SPI Commands" on page 738