818 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
28 :SEARch Commands
:SEARch:SERial:FLEXray:FRAMe
(see page 1138)
Command Syntax
:SEARch:SERial:FLEXray:FRAMe <frame_id>
<frame_id> ::= {ALL | <frame #>}
<frame #> ::= integer from 1-2047
The :SEARch:SERial:FLEXray:FRAMe command specifies the frame ID
value to find when searching for FlexRay frames.
Query Syntax
:SEARch:SERial:FLEXray:FRAMe?
The :SEARch:SERial:FLEXray:FRAMe? query returns the current frame ID
setting.
Return Format
<frame_id><NL>
<frame_id> ::= {ALL | <frame #>}
<frame #> ::= integer from 1-2047
See Also • Chapter 28, “:SEARch Commands,” starting on page 777
• ":SEARch:SERial:FLEXray:MODE" on page 819
To Next Page
Loading...
