794 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
28 :SEARch Commands
:SEARch:RUNT:QUALifier
(see page 1138)
Command Syntax
:SEARch:RUNT:QUALifier <qualifier>
<qualifier> ::= {GREaterthan | LESSthan | NONE}
The :SEARch:RUNT:QUALifier command specifies whether to search for a
runt that is greater than a time value, less than a time value, or any time
value.
Query Syntax
:SEARch:RUNT:QUALifier?
The :SEARch:RUNT:QUALifier? query returns the current runt search
qualifier.
Return Format
<qualifier><NL>
<qualifier> ::= {GRE | LESS NONE}
See Also • Chapter 28, “:SEARch Commands,” starting on page 777
• ":SEARch:MODE" on page 780
To Next Page
Loading...
