Agilent Technologies InfiniiVision 3000 X-Series

:TRIGger Commands 31
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 923
:TRIGger:PATTern:LESSthan
(see page 1138)
Command Syntax
:TRIGger:PATTern:LESSthan <less_than_time>[<suffix>]
<less_than_time> ::= maximum trigger duration in seconds
in NR3 format
<suffix> ::= {s | ms | us | ns | ps}
The :TRIGger:PATTern:LESSthan command sets the maximum duration for
the defined pattern when :TRIGger:PATTern:QUALifier is set to LESSthan.
Query Syntax
:TRIGger:PATTern:LESSthan?
The :TRIGger:PATTern:LESSthan? query returns the duration time for the
defined pattern.
Return Format
<less_than_time><NL>
See Also • "Introduction to :TRIGger Commands" on page 877
• ":TRIGger:PATTern" on page 919
• ":TRIGger:PATTern:QUALifier" on page 924
• ":TRIGger:MODE" on page 886