Agilent Technologies InfiniiVision 3000 X-Series

332 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
16 :FUNCtion Commands
:FUNCtion:BUS:YUNits
(see page 1138)
Command Syntax
:FUNCtion:BUS:YUNits <units>
<units> ::= {VOLT | AMPere | NONE}
The :FUNCtion:BUS:YUNits command specifies the vertical units for the
Chart Logic Bus operations.
This command is available with the DSOX3ADVMATH advanced math
license.
Query Syntax
:FUNCtion:BUS:YUNits?
The :FUNCtion:BUS:YUNits query returns the Chart Logic Bus vertical
units.
Return Format
<units><NL>
<units> ::= {VOLT | AMP | NONE}
See Also • ":FUNCtion:OPERation" on page 347