Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

:SEARch Commands 28
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 817
:SEARch:SERial:FLEXray:DATA:LENGth
(see page 1138)
Command Syntax
:SEARch:SERial:FLEXray:DATA:LENGth <length>
<length> ::= integer from 1 to 12 in NR1 format
The :SEARch:SERial:FLEXray:DATA:LENGth command specifies the length
of data values when searching for FlexRay frames.
The data value is specified using the :SEARch:SERial:FLEXray:DATA
command.
Query Syntax
:SEARch:SERial:FLEXray:DATA:LENGth?
The :SEARch:SERial:FLEXray:DATA:LENGth? query returns the current
data length setting.
Return Format
<length><NL>
<length> ::= integer from 1 to 12 in NR1 format
See Also • Chapter 28, “:SEARch Commands,” starting on page 777
• ":SEARch:SERial:FLEXray:MODE" on page 819
• ":SEARch:SERial:FLEXray:DATA" on page 816

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English