Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

:SYSTem Commands 29
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 855
:SYSTem:ERRor
(see page 1138)
Query Syntax
:SYSTem:ERRor?
The :SYSTem:ERRor? query outputs the next error number and text from
the error queue. The instrument has an error queue that is 30 errors deep
and operates on a first- in, first- out basis. Repeatedly sending the
:SYSTem:ERRor? query returns the errors in the order that they occurred
until the queue is empty. Any further queries then return zero until
another error occurs.
Return Format
<error number>,<error string><NL>
<error number> ::= an integer error code in NR1 format
<error string> ::= quoted ASCII string containing the error message
Error messages are listed in Chapter 36, “Error Messages,” starting on
page 1097.
See Also • "Introduction to :SYSTem Commands" on page 852
• "*ESR (Standard Event Status Register)" on page 168
• "*CLS (Clear Status)" on page 165

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English