Agilent Technologies InfiniiVision 3000 X-Series

:HARDcopy Commands 17
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 371
:HARDcopy:PALette
(see page 1138)
Command Syntax
:HARDcopy:PALette <palette>
<palette> ::= {COLor | GRAYscale | NONE}
The :HARDcopy:PALette command sets the hardcopy palette color.
The oscilloscope's print driver cannot print color images to color laser
printers, so the COLor option is not available when connected to laser
printers.
Query Syntax
:HARDcopy:PALette?
The :HARDcopy:PALette? query returns the selected hardcopy palette color.
Return Format
<palette><NL>
<palette> ::= {COL | GRAY | NONE}
See Also • "Introduction to :HARDcopy Commands" on page 358
• ":HARDcopy:STARt" on page 373
• ":HARDcopy:FACTors" on page 361
• ":HARDcopy:LAYout" on page 364
• ":HARDcopy:FFEed" on page 362
• ":HARDcopy:INKSaver" on page 363