Agilent Technologies InfiniiVision 3000 X-Series - Min_Time>::= Seconds in NR3; Trigger:tv:udtv:pgthan

952 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
31 :TRIGger Commands
:TRIGger:TV:UDTV:PGTHan
(see page 1138)
Command Syntax
:TRIGger:TV:UDTV:PGTHan <min_time>
<min_time> ::= seconds in NR3 format
The :TRIGger:TV:UDTV:PGTHan command specifies the "greater than the
sync pulse width" time in the Generic video trigger. This setting allows
oscilloscope synchronization to the vertical sync.
This command is available with the DSOX3VID extended Video triggering
license.
Query Syntax
:TRIGger:TV:UDTV:PGTHan?
The :TRIGger:TV:UDTV:PGTHan query returns the "greater than the sync
pulse width" time setting.
Return Format
<min_time><NL>
<min_time> ::= seconds in NR3 format
See Also • ":TRIGger:TV:STANdard" on page 948
• ":TRIGger:TV:UDTV:ENUMber" on page 949
• ":TRIGger:TV:UDTV:HSYNc" on page 950