Agilent Technologies InfiniiVision 3000 X-Series

806 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
28 :SEARch Commands
:SEARch:SERial:A429:PATTern:SDI
(see page 1138)
Command Syntax
:SEARch:SERial:A429:PATTern:SDI <string>
<string> ::= "nn" where n ::= {0 | 1}, length always 2 bits
The :SEARch:SERial:A429:PATTern:SDI command defines the ARINC 429
two- bit SDI pattern resource according to the string parameter. This
pattern controls the SDI pattern searched for in each ARINC 429 word.
The specified SDI is only used if the :SBUS<n>:A429:FORMat includes the
SDI field.
Query Syntax
:SEARch:SERial:A429:PATTern:SDI?
The :SEARch:SERial:A429:PATTern:SDI? query returns the current settings
of the specified ARINC 429 two- bit SDI pattern resource in the binary
string format.
Return Format
<string><NL>
Errors • "- 241, Hardware missing" on page 1099
See Also • "Introduction to :TRIGger Commands" on page 877
• ":SBUS<n>:A429:FORMat" on page 641
• ":SEARch:SERial:A429:MODE" on page 804
• ":SEARch:SERial:A429:PATTern:DATA" on page 805
• ":SEARch:SERial:A429:PATTern:SSM" on page 807