760 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
27 :SBUS<n> Commands
:SBUS<n>:UART:COUNt:ERRor
(see page 1138)
Query Syntax
:SBUS<n>:UART:COUNt:ERRor?
Returns the UART error frame count.
Return Format
<frame_count><NL>
<frame_count> ::= integer in NR1 format
Errors • "- 241, Hardware missing" on page 1099
See Also • ":SBUS<n>:UART:COUNt:RESet" on page 761
• "Introduction to :SBUS<n> Commands" on page 629
• ":SBUS<n>:MODE" on page 633
• ":SBUS<n>:UART Commands" on page 754
To Next Page
Loading...
