To Next Page

To Previous Page

608 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide

26 :SAVE Commands

:SAVE:ARBitrary[:STARt]

(see page 1138)

Command Syntax

:SAVE:ARBitrary:[STARt] [<file_spec>]

<file_spec> ::= {<internal_loc> | <file_name>}

<internal_loc> ::= 0-3; an integer in NR1 format

<file_name> ::= quoted ASCII string

The :SAVE:ARBitrary:[STARt] command saves the current arbitrary

waveform to an internal location or a file on a USB storage device.

See Also • "Introduction to :SAVE Commands" on page 607

• ":SAVE:FILename" on page 609

• ":RECall:ARBitrary[:STARt]" on page 599

NOTE

If a file extension is provided as part of a specified <file_name>, it must be ".csv".

Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

Other manuals for Agilent Technologies InfiniiVision 3000 X-Series