Agilent Technologies InfiniiVision 3000 X-Series

672 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
27 :SBUS<n> Commands
:SBUS<n>:FLEXray:BAUDrate
(see page 1138)
Command Syntax
:SBUS<n>:FLEXray:BAUDrate <baudrate>
<baudrate> ::= {2500000 | 5000000 | 10000000}
The :SBUS<n>:FLEXray:BAUDrate command specifies the baud rate as
2.5Mb/s, 5Mb/s, or 10Mb/s.
Query Syntax
:SBUS<n>:FLEXray:BAUDrate?
The :SBUS<n>:FLEXray:BAUDrate? query returns the current baud rate
setting.
Return Format
<baudrate><NL>
<baudrate> ::= {2500000 | 5000000 | 10000000}
See Also • "Introduction to :TRIGger Commands" on page 877
• ":SBUS<n>:FLEXray Commands" on page 669