Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

574 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
24 :POWer Commands
:POWer:SIGNals:OVERshoot
(see page 1138)
Command Syntax
:POWer:SIGNals:OVERshoot <percent>
<percent> ::= percent of overshoot value in NR1 format
The :POWer:SIGNals:OVERshoot command specifies the percent of
overshoot of the output voltage. This value is used to determine the
settling band value for the transient response and to adjust the vertical
scale of the oscilloscope.
Query Syntax
:POWer:SIGNals:OVERshoot?
The :POWer:SIGNals:OVERshoot query returns the overshoot percent
setting.
Return Format
<percent><NL>
<percent> ::= percent of overshoot value in NR1 format
See Also • ":POWer:TRANsient:APPLy" on page 591
• ":POWer:SIGNals:AUTosetup" on page 564
• ":POWer:SIGNals:DURation:TRANsient" on page 572
• ":POWer:SIGNals:IEXPected" on page 573
• ":POWer:SIGNals:VSTeady:TRANsient" on page 580
• ":POWer:SIGNals:SOURce:CURRent<i>" on page 581
• ":POWer:SIGNals:SOURce:VOLTage<i>" on page 582

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English