446 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
20 :MEASure Commands
:MEASure:STATistics
(see page 1138)
Command Syntax
:MEASure:STATistics <type>
<type> ::= {{ON | 1} | CURRent | MINimum | MAXimum | MEAN | STDDev
| COUNt}
The :MEASure:STATistics command determines the type of information
returned by the :MEASure:RESults? query. ON means all the statistics are
on.
Query Syntax
:MEASure:STATistics?
The :MEASure:STATistics? query returns the current statistics mode.
Return Format
<type><NL>
<type> ::= {ON | CURR | MIN | MAX | MEAN | STDD | COUN}
See Also • "Introduction to :MEASure Commands" on page 406
• ":MEASure:RESults" on page 438
• ":MEASure:STATistics:DISPlay" on page 447
• ":MEASure:STATistics:RESet" on page 450
• ":MEASure:STATistics:INCRement" on page 448
Example Code • "Example Code" on page 438
To Next Page
Loading...
