800 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
28 :SEARch Commands
:SEARch:TRANsition:SOURce
(see page 1138)
Command Syntax
:SEARch:TRANsition:SOURce <source>
<source> ::= CHANnel<n>
<n> ::= 1 to (# analog channels) in NR1 format
The :SEARch:TRANsition:SOURce command selects the channel on which
to search for edge transitions.
Query Syntax
:SEARch:TRANsition:SOURce?
The :SEARch:TRANsition:SOURce? query returns the current transition
search source.
Return Format
<source><NL>
<source> ::= CHAN<n>
See Also • Chapter 28, “:SEARch Commands,” starting on page 777
• ":SEARch:MODE" on page 780
• ":SEARch:TRANsition:SLOPe" on page 799
To Next Page
Loading...
