Agilent Technologies InfiniiVision 3000 X-Series - OPT (Option Identification)

Common (*) Commands 5
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 173
*OPT (Option Identification)
(see page 1138)
Query Syntax
*OPT?
The *OPT? query reports the options installed in the instrument. This
query returns a string that identifies the module and its software revision
level.
Return Format
0,0,<license info>
<license info> ::= <All field>, <reserved>, <MSO>, <reserved>,
<Memory>, <Low Speed Serial>, <Automotive Serial>,
<reserved>, <FlexRay Serial>,
<Power Measurements>, <RS-232/UART Serial>,
<Segmented Memory>, <Mask Test>, <reserved>,
<Bandwidth>, <reserved>, <reserved>, <reserved>,
<I2S Serial>, <reserved>, <Educator's Kit>,
<Waveform Generator>, <MIL-1553/ARINC 429 Serial>,
<Extended Video>, <Advanced Math>, <reserved>,
<reserved>, <reserved>, <Digital Voltmeter>,
<reserved>
<All field> ::= {0 | All}
<reserved> ::= 0
<MSO> ::= {0 | MSO}
<Memory> ::= {0 | MEMUP}
<Low Speed Serial> ::= {0 | EMBD}
<Automotive Serial> ::= {0 | AUTO}
<FlexRay Serial> ::= {0 | FLEX}
<Power Measurements> ::= {0 | PWR}
<RS-232/UART Serial> ::= {0 | COMP}
<Segmented Memory> ::= {0 | SGM}
<Mask Test> ::= {0 | MASK}
<Bandwidth> ::= {0 | BW20 | BW50}
<I2S Serial> ::= {0 | AUDIO}
<Educator's Kit> ::= {0 | EDK}
<Waveform Generator> ::= {0 | WAVEGEN}
<MIL-1553/ARINC 429 Serial> ::= {0 | AERO}
<Extended Video> ::= {0 | VID}
<Advanced Math> ::= {0 | ADVMATH}
<Digital Voltmeter> ::= {0 | DVM}