Agilent Technologies InfiniiVision 3000 X-Series

Obsolete and Discontinued Commands 35
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 1067
:MEASure:SCRatch
(see page 1138)
Command Syntax
:MEASure:SCRatch
The :MEASure:SCRatch command clears all selected measurements and
markers from the screen.
NOTE
The :MEASure:SCRatch command is obsolete and is provided for backward compatibility to
previous oscilloscopes. Use the :MEASure:CLEar command (see page 411) instead.