Agilent Technologies InfiniiVision 3000 X-Series - Sbus<N>:I2 S:twidth

:SBUS<n> Commands 27
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 705
:SBUS<n>:I2S:TWIDth
(see page 1138)
Command Syntax
:SBUS<n>:I2S:TWIDth <word_size>
<word_size> ::= 4-32 in NR1 format
The :SBUS<n>:I2S:TWIDth command sets the width of the transmitted data
word in I2S anywhere from 4 bits to 32 bits.
Query Syntax
:SBUS<n>:I2S:TWIDth?
The :SBUS<n>:I2S:TWIDth? query returns the currently set I2S transmitted
data word width.
Return Format
<word_size><NL>
<word_size> ::= 4-32 in NR1 format
See Also • "Introduction to :TRIGger Commands" on page 877
• ":SBUS<n>:I2S:ALIGnment" on page 690
• ":SBUS<n>:I2S:CLOCk:SLOPe" on page 692
• ":SBUS<n>:I2S:RWIDth" on page 693
• ":SBUS<n>:I2S:WSLow" on page 706