Agilent Technologies InfiniiVision 3000 X-Series

:WGEN Commands 33
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 999
:WGEN:ARBitrary:BYTeorder
(see page 1138)
Command Syntax
:WGEN:ARBitrary:BYTeorder <order>
<order> ::= {MSBFirst | LSBFirst}
The :WGEN:ARBitrary:BYTeorder command selects the byte order for
binary transfers.
Query Syntax
:WGEN:ARBitrary:BYTeorder?
The :WGEN:ARBitrary:BYTeorder query returns the current byte order
selection.
Return Format
<order><NL>
<order> ::= {MSBFirst | LSBFirst}
See Also • ":WGEN:ARBitrary:DATA" on page 1000
• ":WGEN:ARBitrary:DATA:DAC" on page 1003