364 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
17 :HARDcopy Commands
:HARDcopy:LAYout
(see page 1138)
Command Syntax
:HARDcopy:LAYout <layout>
<layout> ::= {LANDscape | PORTrait}
The :HARDcopy:LAYout command sets the hardcopy layout mode.
Query Syntax
:HARDcopy:LAYout?
The :HARDcopy:LAYout? query returns the selected hardcopy layout mode.
Return Format
<layout><NL>
<layout> ::= {LAND | PORT}
See Also • "Introduction to :HARDcopy Commands" on page 358
• ":HARDcopy:STARt" on page 373
• ":HARDcopy:FACTors" on page 361
• ":HARDcopy:PALette" on page 371
• ":HARDcopy:FFEed" on page 362
• ":HARDcopy:INKSaver" on page 363
To Next Page
Loading...
