Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

:WAVeform Commands 32
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 991
:WAVeform:XREFerence
(see page 1138)
Query Syntax
:WAVeform:XREFerence?
The :WAVeform:XREFerence? query returns the x- reference value for the
currently specified source. This value specifies the index of the data point
associated with the x-origin data value. In this product, the x-reference
point is the first point displayed and XREFerence is always 0.
Return Format
<value><NL>
<value> ::= x-reference value=0in32-bit NR1 format
See Also • "Introduction to :WAVeform Commands" on page 961
• ":WAVeform:PREamble" on page 976
• ":WAVeform:XORigin" on page 990
Example Code • "Example Code" on page 977

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English