Agilent Technologies InfiniiVision 3000 X-Series

378 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
18 :LISTer Commands
:LISTer:REFerence
(see page 1138)
Command Syntax
:LISTer:REFerence <time_ref>
<time_ref> ::= {TRIGger | PREVious}
The :LISTer:REFerence command selects whether the time value for a
Lister row is relative to the trigger ot the previous Lister row.
Query Syntax
:LISTer:REFerence?
The :LISTer:REFerence? query returns the Lister time reference setting.
Return Format
<time_ref><NL>
<time_ref> ::= {TRIGger | PREVious}
See Also • "Introduction to :LISTer Commands" on page 375
• ":SBUS<n>:DISPlay" on page 632
• ":LISTer:DATA" on page 376
• ":LISTer:DISPlay" on page 377