Agilent Technologies InfiniiVision 3000 X-Series

To Next Page

To Previous Page

910 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide

31 :TRIGger Commands

:TRIGger:GLITch:LESSthan

(see page 1138)

Command Syntax

:TRIGger:GLITch:LESSthan <less_than_time>[<suffix>]

<less_than_time> ::= floating-point number in NR3 format

<suffix> ::= {s | ms | us | ns | ps}

The :TRIGger:GLITch:LESSthan command sets the maximum pulse width

duration for the selected :TRIGger:GLITch:SOURce.

Query Syntax

:TRIGger:GLITch:LESSthan?

The :TRIGger:GLITch:LESSthan? query returns the pulse width duration

time for :TRIGger:GLITch:SOURce.

Return Format

<less_than_time><NL>

<less_than_time> ::= floating-point number in NR3 format.

See Also • "Introduction to :TRIGger Commands" on page 877

• ":TRIGger:GLITch:SOURce" on page 915

• ":TRIGger:GLITch:QUALifier" on page 913

• ":TRIGger:MODE" on page 886

Other manuals for Agilent Technologies InfiniiVision 3000 X-Series