Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

:SBUS<n> Commands 27
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 751
:SBUS<n>:SPI:TRIGger:PATTern:MOSI:WIDTh
(see page 1138)
Command Syntax
:SBUS<n>:SPI:TRIGger:PATTern:MOSI:WIDTh <width>
<width> ::= integer from 4 to 64 in NR1 format
The :SBUS<n>:SPI:TRIGger:PATTern:MOSI:WIDTh command sets the width
of the SPI data pattern anywhere from 4 bits to 64 bits.
Query Syntax
:SBUS<n>:SPI:TRIGger:PATTern:MOSI:WIDTh?
The :SBUS<n>:SPI:TRIGger:PATTern:MOSI:WIDTh? query returns the
current SPI data pattern width setting.
Return Format
<width><NL>
<width> ::= integer from 4 to 64 in NR1 format
See Also • "Introduction to :TRIGger Commands" on page 877
• ":SBUS<n>:SPI:TRIGger:PATTern:MOSI:DATA" on page 750
• ":SBUS<n>:SPI:SOURce:MOSI" on page 747
NOTE
The :SBUS<n>:SPI:TRIGger:PATTern:MOSI:WIDTh should be set before
:SBUS<n>:SPI:TRIGger:PATTern:MOSI:DATA.

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English