Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

s1
1043
Agilent InfiniiVision 3000 X-Series Oscilloscopes
Programmer's Guide
35
Obsolete and Discontinued Commands
Obsolete commands are older forms of commands that are provided to
reduce customer rework for existing systems and programs (see"Obsolete
Commands" on page 1138).
Obsolete Command Current Command Equivalent Behavior Differences
ANALog<n>:BWLimit :CHANnel<n>:BWLimit (see
page 264)
ANALog<n>:COUPling :CHANnel<n>:COUPling (see
page 265)
ANALog<n>:INVert :CHANnel<n>:INVert (see
page 268)
ANALog<n>:LABel :CHANnel<n>:LABel (see
page 269)
ANALog<n>:OFFSet :CHANnel<n>:OFFSet (see
page 270)
ANALog<n>:PROBe :CHANnel<n>:PROBe (see
page 271)
ANALog<n>:PMODe none
ANALog<n>:RANGe :CHANnel<n>:RANGe (see
page 277)
:CHANnel:ACTivity (see
page 1049)
:ACTivity (see page 191)
:CHANnel:LABel (see
page 1050)
:CHANnel<n>:LABel (see
page 269) or
:DIGital<n>:LABel (see
page 292)
use CHANnel<n>:LABel for
analog channels and use
DIGital<n>:LABel for digital
channels
:CHANnel:THReshold (see
page 1051)
:POD<n>:THReshold (see
page 527) or
:DIGital<d>:THReshold (see
page 295)
:CHANnel2:SKEW (see
page 1052)
:CHANnel<n>:PROBe:SKEW
(see page 274)

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English