Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

932 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
31 :TRIGger Commands
:TRIGger:SHOLd Commands
Table 133 :TRIGger:SHOLd Commands Summary
Command Query Options and Query Returns
:TRIGger:SHOLd:SLOPe
<slope> (see
page 933)
:TRIGger:SHOLd:SLOPe?
(see page 933)
<slope> ::= {NEGative | POSitive}
:TRIGger:SHOLd:SOURce
:CLOCk <source> (see
page 934)
:TRIGger:SHOLd:SOURce
:CLOCk? (see
page 934)
<source> ::= {CHANnel<n> |
DIGital<d>}
<n> ::= 1 to (# analog channels)
in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format
:TRIGger:SHOLd:SOURce
:DATA <source> (see
page 935)
:TRIGger:SHOLd:SOURce
:DATA? (see page 935)
<source> ::= {CHANnel<n> |
DIGital<d>}
<n> ::= 1 to (# analog channels)
in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format
:TRIGger:SHOLd:TIME:H
OLD <time>[suffix]
(see page 936)
:TRIGger:SHOLd:TIME:H
OLD? (see page 936)
<time> ::= floating-point number
in NR3 format
[suffix] ::= {s | ms | us | ns |
ps}
:TRIGger:SHOLd:TIME:S
ETup <time>[suffix]
(see page 937)
:TRIGger:SHOLd:TIME:S
ETup? (see page 937)
<time> ::= floating-point number
in NR3 format
[suffix] ::= {s | ms | us | ns |
ps}

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English