566 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
24 :POWer Commands
:POWer:SIGNals:CYCLes:QUALity
(see page 1138)
Command Syntax
:POWer:SIGNals:CYCLes:QUALity <count>
<count> ::= integer in NR1 format
Legal values are 1 to 100.
The :POWer:SIGNals:CYCLes:QUALity command specifies the number of
cycles to include in the power quality analysis.
Query Syntax
:POWer:SIGNals:CYCLes:QUALity?
The :POWer:SIGNals:CYCLes:QUALity query returns the number of cycles
currently set.
Return Format
<count><NL>
<count> ::= integer in NR1 format
See Also • ":POWer:QUALity:APPLy" on page 561
• ":POWer:SIGNals:AUTosetup" on page 564
• ":POWer:SIGNals:IEXPected" on page 573
• ":POWer:SIGNals:OVERshoot" on page 574
• ":POWer:SIGNals:SOURce:CURRent<i>" on page 581
• ":POWer:SIGNals:SOURce:VOLTage<i>" on page 582
To Next Page
Loading...
