Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

814 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
28 :SEARch Commands
:SEARch:SERial:FLEXray Commands
Table 116 :SEARch:SERial:FLEXray Commands Summary
Command Query Options and Query Returns
:SEARch:SERial:FLEXra
y:CYCLe <cycle> (see
page 815)
:SEARch:SERial:FLEXra
y:CYCLe? (see
page 815)
<cycle> ::= {ALL | <cycle #>}
<cycle #> ::= integer from 0-63
:SEARch:SERial:FLEXra
y:DATA <string> (see
page 816)
:SEARch:SERial:FLEXra
y:DATA? (see
page 816)
<string> ::= "0xnn...n" where n
::= {0,..,9 | A,..,F | X }
:SEARch:SERial:FLEXra
y:DATA:LENGth
<length> (see
page 817)
:SEARch:SERial:FLEXra
y:DATA:LENGth? (see
page 817)
<length> ::= integer from 1 to 12
in NR1 format
:SEARch:SERial:FLEXra
y:FRAMe <frame id>
(see page 818)
:SEARch:SERial:FLEXra
y:FRAMe? (see
page 818)
<frame_id> ::= {ALL | <frame #>}
<frame #> ::= integer from 1-2047
:SEARch:SERial:FLEXra
y:MODE <value> (see
page 819)
:SEARch:SERial:FLEXra
y:MODE? (see
page 819)
<value> := {FRAMe | CYCLe | DATA
| HERRor | FERRor | AERRor}

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English