Agilent Technologies InfiniiVision 3000 X-Series

804 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
28 :SEARch Commands
:SEARch:SERial:A429:MODE
(see page 1138)
Command Syntax
:SEARch:SERial:A429:MODE <condition>
<condition> ::= {LABel | LBITs | PERRor | WERRor | GERRor | WGERrors
| ALLerrors}
The :SEARch:SERial:A429:MODE command selects the type of ARINC 429
information to find in the Lister display:
• LABel — finds the specified label value.
• LBITs — finds the label and the other word fields as specified.
• PERRor — finds words with a parity error.
• WERRor — finds an intra- word coding error.
• GERRor — finds an inter- word gap error.
• WGERrors — finds either a Word or Gap Error.
• ALLerrors — finds any of the above errors.
Query Syntax
:SEARch:SERial:A429:MODE?
The :SEARch:SERial:A429:MODE? query returns the current ARINC 429
search mode condition.
Return Format
<condition><NL>
<condition> ::= {LAB | LBIT | PERR | WERR | GERR | WGER | ALL}
Errors • "- 241, Hardware missing" on page 1099
See Also • "Introduction to :SBUS<n> Commands" on page 629
• ":SBUS<n>:MODE" on page 633
• ":SEARch:SERial:A429:LABel" on page 803
• ":SEARch:SERial:A429:PATTern:DATA" on page 805
• ":SEARch:SERial:A429:PATTern:SDI" on page 806
• ":SEARch:SERial:A429:PATTern:SSM" on page 807
• ":SBUS<n>:A429:SOURce" on page 643