Agilent Technologies InfiniiVision 3000 X-Series

Commands Quick Reference 4
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 147
:TRIGger:SHOLd:SOURce
:DATA <source> (see
page 935)
:TRIGger:SHOLd:SOURce
:DATA? (see page 935)
<source> ::= {CHANnel<n> |
DIGital<d>}
<n> ::= 1 to (# analog channels)
in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format
:TRIGger:SHOLd:TIME:H
OLD <time>[suffix]
(see page 936)
:TRIGger:SHOLd:TIME:H
OLD? (see page 936)
<time> ::= floating-point number
in NR3 format
[suffix] ::= {s | ms | us | ns |
ps}
:TRIGger:SHOLd:TIME:S
ETup <time>[suffix]
(see page 937)
:TRIGger:SHOLd:TIME:S
ETup? (see page 937)
<time> ::= floating-point number
in NR3 format
[suffix] ::= {s | ms | us | ns |
ps}
Table 57 :TRIGger:SHOLd Commands Summary (continued)
Command Query Options and Query Returns
Table 58 :TRIGger:TRANsition Commands Summary
Command Query Options and Query Returns
:TRIGger:TRANsition:Q
UALifier <qualifier>
(see page 939)
:TRIGger:TRANsition:Q
UALifier? (see
page 939)
<qualifier> ::= {GREaterthan |
LESSthan}
:TRIGger:TRANsition:S
LOPe <slope> (see
page 940)
:TRIGger:TRANsition:S
LOPe? (see page 940)
<slope> ::= {NEGative | POSitive}
:TRIGger:TRANsition:S
OURce <source> (see
page 941)
:TRIGger:TRANsition:S
OURce? (see page 941)
<source> ::= CHANnel<n>
<n> ::= 1 to (# analog channels)
in NR1 format
:TRIGger:TRANsition:T
IME <time>[suffix]
(see page 942)
:TRIGger:TRANsition:T
IME? (see page 942)
<time> ::= floating-point number
in NR3 format
[suffix] ::= {s | ms | us | ns |
ps}
Table 59 :TRIGger:TV Commands Summary
Command Query Options and Query Returns
:TRIGger:TV:LINE
<line number> (see
page 944)
:TRIGger:TV:LINE?
(see page 944)
<line number> ::= integer in NR1
format
:TRIGger:TV:MODE <tv
mode> (see page 945)
:TRIGger:TV:MODE?
(see page 945)
<tv mode> ::= {FIEld1 | FIEld2 |
AFIelds | ALINes | LINE | LFIeld1
| LFIeld2 | LALTernate}