Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

210 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
6 Root (:) Commands
<value> ::= integer in NR1 format.
See Also • "Introduction to Root (:) Commands" on page 190
• ":CHANnel<n>:PROTection" on page 276
• ":OPEE (Operation Status Enable Register)" on page 205
• ":OPERegister:CONDition (Operation Status Condition Register)" on
page 207
• ":OVLenable (Overload Event Enable Register)" on page 211
• ":OVLRegister (Overload Event Register)" on page 213
• "*STB (Read Status Byte)" on page 182
• "*SRE (Service Request Enable)" on page 180
• ":MTERegister[:EVENt] (Mask Test Event Event Register)" on page 203
• ":MTEenable (Mask Test Event Enable Register)" on page 201

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English