:DVM Commands 14
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 311
:DVM:CURRent
(see page 1138)
Query Syntax
:DVM:CURRent?
The :DVM:CURRent? query returns the displayed 3-digit DVM value based
on the current mode.
Return Format
<dvm_value><NL>
<dvm_value> ::= floating-point number in NR3 format
See Also • ":DVM:SOURce" on page 315
• ":DVM:ENABle" on page 312
• ":DVM:MODE" on page 314
• ":DVM:FREQuency" on page 313
To Next Page
Loading...
