Agilent Technologies InfiniiVision 3000 X-Series

Setting Up 2
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 57
3 Test some commands on the instrument:
a Right- click on the instrument and choose Send Commands To This
Instrument from the popup menu.
b In the Agilent Interactive IO application, enter commands in the
Command field and press Send Command, Read Response, or Send&Read.
c Choose Connect>Exit from the menu to exit the Agilent Interactive IO
application.
4 In the Agilent Connection Expert application, choose File>Exit from the
menu to exit the application.