Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

:SBUS<n> Commands 27
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 701
Query Syntax :SBUS<n>:I2S:TRIGger:PATTern:DATA?
The :SBUS<n>:I2S:TRIGger:PATTern:DATA? query returns the currently
specified I2S trigger data pattern.
Return Format
<string><NL>
See Also • "Introduction to :TRIGger Commands" on page 877
• ":SBUS<n>:I2S:TRIGger:PATTern:FORMat" on page 702
• ":SBUS<n>:I2S:TRIGger" on page 697
• ":SBUS<n>:I2S:RWIDth" on page 693
• ":SBUS<n>:I2S:TWIDth" on page 705
• ":SBUS<n>:I2S:TRIGger:AUDio" on page 699
NOTE
If more bits are sent for <string> than the specified trigger data length, the most significant
bits will be truncated. If the word size is changed after the <string> is programmed, the
added or deleted bits will be added to or deleted from the least significant bits.

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English