Epson AcuLaser CX11 Service Manual

EPSON AcuLaser CX11/CX11F Revision B
APPENDIX Fax Unit System 637
SYS_OEM_MODE 300 010
---
002
OEM setting
0 = ORIGINAL
1 = OEM
ORIGINAL
(0)
Fixed to 0
(for expansion)
SYS_LANGUAGE 300 011
{
003
Language setting to be used for printing fax reports 0 = Japanese
1 = English
2 = US English
3 = Germany
4 = French
5 = Spanish
6 = Portuguese
7 = Italian
8 = Dutch
9 = Russian
10 = Chinese
11 = Korean
12 = Taiwanese
13 = Danish
14 = Swedish
15 = Finnish
Japanese
(0)
---
SYS_MACHINE_MODE 300 028
---
004
Operating Mode 0 = Normal mode1 = Maintenance mode Normal
(0)
---
SYS_SPEAKER_ENABLE 300 002
---
005
Enables or disables the line monitor function
When this is set to “disable”, the speaker volume setting (300-
003) becomes invalid. (The speaker does not sound)
0 = Disable
1 = Enable
Enable
(1)
Fixed to 1
SYS_SPEAKER_VOLUME 300 003
{
006
Speaker volume setting 1 = OFF
2 = Minimum
3 = Medium
4 = Full
Medium
(3)
---
SYS_INFORMATION_SERVICE 300 004
---
007
Enables or disables the notification function 0 = Disable
1 = Enable
Disable
(0)
Not used
SYS_FILE_MEM_SIZE 300 008
---
008
Total memory size (SDRAM) for a file 1 to 4 Mbytes
4Mbytes
Not used
SYS_FORCED_POLLING 300 012
---
009
Enables or disables the forced polling function 0 = Disable
1 = Enable
Disable
(0)
Not used
SYS_DRPD_ENABLE 300 029
---
00A
Enables or disables the DRPD setting
When this is set to “disable”, the DRPD setting (100-013) becomes
invalid.
0 = Disable
1 = Enable
Disable
(0)
---
SYS_RX_RESTRICT 310 005
---
00B
Enables or disables the fax receiving restriction function
When the function is enabled, the fax unit does not accept faxes
from sources whose numbers are not stored in the speed-dial
memory.
0 = Disable
1 = Enable
Disable
(0)
Not used
Table 7-15. List of System Parameter (System)
Label
Maintenance
Code
User
Access
Internal
Address
Description Setting Value Default Remarks
Main Sub

Epson AcuLaser CX11 Specifications

General

Brand	Epson
Model	AcuLaser CX11
Category	All in One Printer
Language	English