Huawei Quidway S3900 Series - Display Udp Statistics

Command Manual – IP Address and Confiugration
Quidway S3900 Series Ethernet Switches-Release
1510 Chapter 2 IP Performance Configuration Commands
2-15
Example
# View the state of all the TCP connections.
<Quidway> display tcp status
*: TCP MD5 Connection
TCPCB Local Add:port Foreign Add:port State
03e37dc4 0.0.0.0:4001 0.0.0.0:0 Listening
04217174 100.0.0.204:23 100.0.0.253:65508 Established
Table 2-6 Description on the fields of the display tcp status command
Field Description
*
If there is an asterisk before a connection, it means that the
TCP connection is authenticated through the MD5 algorithm
TCPCB Address of the TCP control block
Local Add:port Local IP address; port number
Foreign Add:port Remote IP address; port number
State TCP connection state
2.1.12 display udp statistics
Syntax
display udp statistics
View
Any view
Parameter
None
Description
Use the display udp statistics command to view the statistics about UDP packets.
Related command: reset udp statistics.
Example
# View the statistics about UDP packets.
<Quidway>display udp statistics
Received packets: