Command Manual – Mirroring
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 Mirroring Commands
Huawei Technologies Proprietary
1-14
Parameter
inbound | outbound | both: Direction of mirrored packets. inbound: only mirrors the
packets received via the port; outbound: only mirrors the packets sent by the port;
both: mirrors all packets received and sent by the port.
Description
Use the mirroring-port command to configure a source port.
Use the undo mirroring-port command to remove the configuration of a source port.
Related command: display mirror
Example
# Configure GigabitEthernet1/1/1 as the source port and mirror all packets received
and sent via this port.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface GigabitEthernet1/1/1
[Quidway-GigabitEthernet1/1/1] mirroring-port both
1.2.5 monitor-port
Syntax
monitor-port
undo monitor-port
View
Ethernet port view
Parameter
None
Description
Use the monitor-port command to configure the destination port.
Use the undo monitor-port command to remove the configuration of the destination
port.
You can configure only one destination port on the switch; all mirrored packets will be
sent to the destination port.
Related command: display mirror
Example
# Configure GigabitEthernet1/1/4 as the destination port.
To Next Page
Loading...
Need help?
General