Huawei Quidway S3900 Series Command Manual

Command Manual – System Maintenance and Debugging
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 3 Device Management Commands
Huawei Technologies Proprietary
3-1
Chapter 3 Device Management Commands
3.1 Device Management Commands
3.1.1 boot boot-loader
Syntax
boot boot-loader [ backup-attribute ] { file-url [ fabric ] | device-name }
View
User view
Parameter
backup-attribute: Sets the specified file to a backup file.
file-url: Path + name of an host software file in the Flash memory.
fabric: File path in fabric mode.
device-name: File name, in the form of unit[NO.]>flash:, which is used to save the
specified file to the Flash memory of a specified switch.
Description
Use the boot boot-loader command to specify the host software that will be adopted
when the switch reboots next time.
You can use this command to specify a .bin file in the Flash memory as the host
software to be adopted at reboot.
Example
# Specify the host software that will be adopted when the current switch reboots next
time.
<Quidway> boot boot-loader S3900.BIN
The specified file will be booted next time on unit 1!
3.1.2 boot bootrom
Syntax
boot bootrom { file-url | device-name }
View
User view

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English