Command Manual - File System Management
Quidway S5100-EI Series Ethernet Switches-Release 1510
Chapter 2 FTP/TFTP Lighting Configuration
Commands
Huawei Technologies Proprietary
2-5
2.1.6 get
Syntax
get remotefile [ localfile ]
View
FTP client command view
Parameter
localfile: Local file name.
remotefile: File name on the FTP server.
Description
Use the get command to download a remote file and save the file to the local device.
If no local file name is specified, the switch will save the remote file locally with the
same file name as that on the remote FTP server
Example
# Download the file temp1.c and save it to the local file temp.c.
<Quidway> ftp 1.1.1.1
Trying ...
Press CTRL+K to abort
Connected.
220 FTP service ready.
User(none):hello
331 Password required for hello.
Password:
230 User logged in.
[ftp] get temp1.c temp.c
200 Port command okay.
150 Opening ASCII mode data connection for temp1.c.
..226 Transfer complete.
FTP: 1709 byte(s) received in 2.176 second(s) 0.00 byte(s)/sec.
[ftp]
2.2 TFTP Command
2.2.1 tftp get
Syntax
tftp tftp-server get source-file [ dest-file ]
To Next Page
Loading...
Need help?
General