Huawei Quidway S3900 Series Command Manual

Command Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 5 IGMP Configuration Commands
Huawei Technologies Proprietary
5-11
Related command: display igmp group.
Example
# Set the maximum response time carried in host-query packets to 8 seconds.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Vlan-interface 10
[Quidway-Vlan-interface10] igmp max-response-time 8
5.1.11 igmp proxy
Syntax
igmp proxy Vlan-interface interface-number
undo igmp proxy
View
VLAN view
Parameter
interface-number: Proxy interface number.
Description
Use the igmp proxy command to specify an interface of the Layer 3 endpoint switch as
the IGMP proxy interface of another interface.
Use the undo igmp proxy command to disable this configuration.
The IGMP proxy feature is disabled by default.
You must enable the PIM protocol on the interface first before enabling the igmp proxy
command on the interface. One interface cannot serve as the IGMP proxy interface of
two or more interfaces.
If the IGMP proxy feature is configured on the same interface for multiple times, the
latest configuration takes effect.
Related command: pim neighbor-policy.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English